Digg LinkedIn delicious StumbleUpon Meneame Reddit Twitter Mixx Sphinn Myspace Technorati Google Facebook Yahoo Buzz
Home  

Effective And Reliable Manufactured Home Wall Repair Tips


 Whether you’re a homeowner or a contractor, the process of repairing a manufactured home damaged walls is often the same. If you have the tools and the time, you can stay hassle free, do it by yourself and hence in the long run save some cash.

Generally, manufactured homes normally have got three different kinds of interior walls, depending on who manufactured the home and how old the home is: standard drywall, vinyl coated drywall and wood paneling. However, each kind of material presents its own challenges when attempting repairs.

Considerations:

Builders of the manufactured homes must design and build homes while considering weight as a major factor. Basically, manufactured homes are usually transported from the manufacturer to the customer over the highway system. Walls in the manufactured homes normally are always constructed using lighter weight materials than would be found in the stick built homes.

Vinyl Coated Drywall:

Vinyl coated drywall is the most difficult material when it comes to do it yourself repairing tricks. Generally, during the home’s construction, the vinyl usually is glued in huge sheets to the drywall, leaving no visible seams in the walls. Vinyl coated drywall cannot in anyway be repaired using any of the common known repair techniques, the problem being the chemical nature of the vinyl.

Paint or the other commonly known patching materials cannot adhere to the vinyl surfaces over time. Also, replacing the panels isn’t either an option, since the patch will always be unattractive and visible. The only available option is to either remove the vinyl coated drywall or to remove the offending areas and replace them with a new drywall.

If you’re going to cover the damage, it’s ideal you consider a wall hanging if the damage is very high on the wall or installing wainscoting if for instance the damage is very low on the wall.


Standard Drywall:

Standard drywall is one of the easiest materials to repair. The drywalls often come in different thickness; because of the consideration of the weight. The typical manufactured home either has a quarter or 3/7 inch thick drywall on the wall. Make use of a keyhole in order to cut out the damaged areas. However, ensure that you only cut what is required to get rid of the damaged drywall.

Cut pieces of one by –four inch wood board long enough to at least extend one inch below and above the cut opening. Insert carefully the wood backing into the opening and then install the drywall screws via the undamaged drywall into your wood backing, just below and just above the opening.

Cut a drywall piece that will perfectly fit the opening and then carefully put it in place. Via the drywall patch, carefully install the drywall screws. Using a standard drywall taping compound, tape the patch. When the taped repairs dries well, add as many coats of the compound as required so that you can make the area smooth as well as the tape invisible. Sand lightly and then texture the specific affected area. It is ideal that you buy small cans of the spray texture from any reliable hardware store so that you can access standard products. Try practicing with the texture on any scrap piece of drywall till you are able to perfectly match the texture, which is already on your wall. Paint the patch once you confirm it has dried properly.

Wood Paneling:

Repairing holes in paneling normally is just as simple as replacing the damaged panels with other matching panels. Don’t in anyway attempt replacing small areas of paneling; it will never in any way look right.

It’s possible to contact the manufacturers so that you can obtain replacement panels, as long as they are still in business. The manufacturers who often make use of the wood paneling normally tend to use the same color as well as style throughout the particular house. You can remove the panels from the interior of the closets and use them for replacement panels in the more visible places of your home.

However, you must ensure that you install the replacement panels with small finishing nails rather than the bigger ones so that you can avoid damaging them. Also, watch for the nails embedded in the old paneling when attempting to fix them.


Twentynine Palms, Kenner, Ferndale, Paragould, Brownsburg, Pleasantville, Bell, Sayreville, Florence, Temple City, Maryville, Norristown, Washington, Platteville, Kingston, South St. Paul, New Carrollton, Arizona, Boone, Pinecrest, Tennessee, Lincolnton, Danville, Floral Park, Wisconsin, Bay St. Louis, Marietta, Vermont, Ohio, Dunedin, St. Charles, Shawnee, Connersville, Vandalia, Soledad, Mansfield, Morris, Cloquet, Ashwaubenon, Evergreen Park, Quincy, Katy, Nixa, Hanford, Huron, Clifton, Findlay, Bremerton, Dublin, Port Neches, University Heights, Sylvania, Fort Atkinson, Belleville, St. Louis Park, Erie, Ridgewood, Allentown, Lake Havasu City, Murray, Chesapeake, White Bear Lake, Yonkers, Los Banos, Brooklyn, Green River, Summit, Parkersburg, Brandon, Alton, Cambridge, Oregon, Washington, Centerville, Mukilteo, South Carolina, South Portland, Hendersonville, North Carolina, Palatka, Mississippi, Great Falls, Hilton Head Island, Wheeling, Lemon Grove